Never Paint Your Bollards Again!
The Original Dome-Topped Bollard Cover
Reduce the need for paint and future maintenance costs with Ideal Shield’s Bollard Covers. Ideal Shield’s Bollard Covers are easily installed with our patented tape, sliding over steel pipe bollards for quick and permanent installation. Bollard sleeves fit 4’’, 6’’ and 8’’ pipes and are available in eleven standard colors. Bollard covers are manufactured from recyclable plastic and produced in the USA. Standard sizes and colors are in stock and ready to be shipped. 1/8’’ Bollard Covers are ideal for areas where eliminating the need to paint and enhancing your facility’s appearance is a priority.
The Ideal Advantage
You may also be interested in:
Thermoplastic Polyethylene with UV and Anti-Static additives (prevents fading for 5 years)
4″ and 6″
8″ only available with 1/4″ nominal wall thickness
59″ standard height at the top of the dome
Cut to custom heights with no additional charges reducing the cost of freight
Patented installation tape included to secure for permanent fit
OD= Outside Diameter
ID= Inside Diameter
|Pipe OD||Sleeve ID||Pipe Circumference||Pipe Size||Ideal Sleeve Size|
For a snugger fit, please see 1/4 bollard covers page
Ideal Shield offers 11 standard colors. Custom colors are available for larger quantities upon request. To discuss a custom color option, please contact our customer service at (866) 825-8659.
*Reproduction of web colors are not always “what you see is what you get” because colors on your monitor and the color produced physically can, and most likely will, vary. This is because different devices have different color “languages” and will output color differently. The colors you see on your monitor are the result of reflective light and colors you see physically are a mix of different inks which will vary from your monitor display.
To get a better result it is important to choose your colors CAREFULLY. We cannot be held responsible for colors that are off a few shades due to the vast complexities of media differences. Choose a Pantone or Sherwin Williams colors to get the best result, or contact us and we’ll be happy to send you a sample.
How many different sizes do you offer?
The 1/8’’ bollard cover is available to fit 4’’ and 6’’ steel pipe diameters. If you have a larger or smaller pipe size diameter, our ¼’’ wall thickness bollard cover fits all pipe sizes 3’’-10’’.
How do I determine what bollard cover size to order?
Why is the size of the bollard cover smaller than the outside diameter of my pipe?
Pipe is measured by inside diameter. For example, 6? pipe has an outside diameter of 6 5/8?. Our bollard sizes coincide with the pipe’s outside diameter, ex. our 6? cover has an inside diameter of about 6 7/8? to fit over the 6 5/8? outside diameter of a 6” pipe.
How do I install a bollard cover?
Each bollard cover is delivered with two pieces of our patented foam neoprene tape. Apply the neoprene tape around the circumference of the steel bollard 3? down from the top of the post and 3? up from the bottom of the post. Once the tape is applied, slide the bollard cover over, eliciting the sound of air squeezing out between the post and sleeve as it creates a vacuum seal. If the above directions are followed correctly, the Ideal Shield Bollard Cover should fit tight with no gaps.
What colors do your bollards come in?
Our standard colors are yellow, red, orange, white, accessible blue, gray, forest green, urban bronze, black, brown and orange. Custom colors are available for larger quantities upon request. To discuss a custom color option, please contact customer service at (866) 825-8659.
Do reflective stripes come on the bollard covers?
Reflective stripes can be added for an additional charge – see “Reflective Bollard Covers” or call for pricing.
Kari Carper - BDH Contracting
Kevin Korb - Rite Hite
Donnie Frederick - Odessa College
- Carl Baltosiewich w/St. Cyprian
When looking for an “expert” in a specific field, you look for a couple distinct…
Copyright © 2017 Ideal Shield. All Rights Reserved.