Quote
Page Links
Get a quote
10" Pawn Decorative Bollard Covers

10″ Pawn
Decorative Bollard

Stylish Design

Make a Statement with your Storefront

Our Pawn Decorative Bollard Covers fit over 10” pipe with steel inserts also available to fit smaller pipe sizes. These commanding arrangements stand at an overall height of 49” and are made of 1/4″ nominal wall thickness polyethylene thermoplastic (LDPE).

A sophisticated design, our Pawn Decorative Bollard Cover consists of a wide base with a clean finish and a flat-topped casting. Our product also includes patented installation tape for a lasting fit. This structure can come in any color and can be cut to custom heights at no additional charge, fully complementing your building exterior or corporate branding needs. 

Ideal Shield Decorative Bollard Covers enhance the aesthetics of security posts and steel bollards. Our Decorative Covers are easily installed and are a cost-effective alternative to expensive cast iron, stainless steel or concrete bollards

Check out our full line of Decorative Bollard Covers to see which fits your business best. 

Request a Quote

Product
Details
Product Details

Made Of: 1/4″ nominal wall thickness LDPE plastic
Pipe Fit: Fits 10" pipe diameter (can fit 4", 6", 8" pipe with insert)
Height: 49" overall (8" & 10" pipe fits max 41"; 4" & 6" pipe fits max 48")

Part Number Example:

part number guide

Heights:

41-48"

max pipe fit

depends on pipe diameter

COLORS:

Available in Any Color

INSTALL:

Patented Installation Tape Included

To Secure a Permanent Fit

The Ideal

Advantage

  • A fraction of the costs of concrete and stainless steel bollards
  • Maintenance free product – reduces costs and labor by eliminating the need to paint
  • Easy and permanent installation method ensures secure fit
  • Available in any color to meet facility branding needs
  • Fits 8″ or 10” pipe with on overall height of 41″, and 4″ or 6″ pipe up to 48″
  • Steel inserts available for smaller pipe sizes

Color
Chart


Ideal Shield offers 11 standard colors. Custom colors are available for larger quantities upon request. To discuss a custom color option, please contact our customer service at (866) 825-8659

[ CLICK THE COLORS BELOW TO SEE THEM APPLIED ]

*Reproduction of web colors are not always “what you see is what you get” because colors on your monitor and the color produced physically can, and most likely will, vary. 

285 Blue (Pantone 285C)

Gray (Pantone 11C)

Forest Green (Pantone 343C)

402 Gray (Pantone 402C)

Black (Pantone 6C)

Blue (Pantone 2736C)

Brown (Pantone PQ-440C)

Orange (Pantone 173C)

Red (Pantone 187C)

White (Pantone 663C)

Yellow (Pantone 012C)

Urban Bronze (Pantone 2336 XGC)

Click on the color swatches for samples

What
Size Do
I Need?

REFERENCE CHART

  • OD=Outside Diameter
  • ID=Inside Diameter
Pipe OD Sleeve ID Pipe Circum. Pipe Size Ideal Sleeve Size
3.5 3 5/8″ 11″ 3″ 3″
4″ 4 1/8″ 12.5″ 3.5″ 3.5″
4.5″ 4 7/8″ 14″-15″ 4″ 4″
5.563″ 5 7/8″ 17.5″ 5″ 5″
6.625″ 6 7/8″ 20.5″-21.5″ 6″ 6″
7.5″ 7 7/8″ 24″ 7″ 7″
8.625″ 8 7/8″ 27″-27.5″ 8″ 8″
10.75″ 10 7/8″ 34″-34.5″ 10″ 10″
12.75″ 12 5/8″ 37 5/8″ 12″ 12″

Click Here to download the Bollard Cover Measuring Tool Click here for printing information.

Downloads

Brand Your Bollards & Bases

Interested in branding your Bollard Covers and Sign Bases with custom colors and/or decals? Click here to learn more

Frequently Asked
Questions

Our Decorative Bollards Covers are made to fit over 6’’ pipe or 10’’ pipe. We have four styles that fit over 6’’ pipe and three styles that fit over 10’’. We do offer inserts to fit over smaller pipe sizes in order for the bollard cover to securely fit.
The only information we need from you is the size of your pipe you want to cover. When you receive your material, the insert is inside of the bollard cover. All you have to do is slide your deco cover over your steel pipe.
Measure the circumference (distance around the post) Take that dimension and divide it by pi (3.14) Example: Circumference is 21’’. Divide by 3.14. Pipe size in 6.625’’ The bollard cover size you need is 6’’
Pipe is measured by inside diameter. For example, 6” pipe has an outside diameter of 6 5/8”. Our bollard sizes coincide with the pipe’s outside diameter, ex. our 6” cover has an inside diameter of about 6 7/8” to fit over the 6 5/8” outside diameter of a 6” pipe.
Each bollard cover is delivered with two pieces of our patented foam neoprene tape. Apply the neoprene tape around the circumference of the steel bollard 3″ down from the top of the post and 3″ up from the bottom of the post. Once the tape is applied, slide the bollard cover over, eliciting the sound of air squeezing out between the post and sleeve as it creates a vacuum seal. If the above directions are followed correctly, the Ideal Shield Bollard Cover should fit tight with no gaps.
Decorative Bollard Covers are available in any color to match corporate branding or architecture.
All we need is a Pantone color number. We have done Custom Colors for Fortune 500 companies with great results.
Lead time will depend on if we have matched the color before. We have over 300 color matches in inventory. Lead time is 2-3 weeks if matched and 4-6 weeks if it’s a custom match.
No, we do not require a minimum quantity.

What our customers are saying

“First and foremost, we have loved the bases. They have gone through the various states of weather that Minnesota has to offer and they are withstanding the weather and doing a great job for us. At this time, we have all of our needs, however, after the Super Bowl and when we head into our spring events we could be looking to purchasing additional signs. ” 

Representative from US Bank Stadium, home of the Minnesota Vikings & Super Bowl 52

“This is just what we were looking for. Well made. We will be installing it next week. Everyone here is excited to have a railing to hang onto with winter coming. We at St. Cyprian thank you and your facility for help us.”

Carl Baltosiewich w/St. Cyprian

“Ideal Shield had some of the best prices on the market for bollards and covers. They were very easy to deal with and provided prompt shipment. The quality of the material was exceptional and a breeze to install.” 

James Harvill

“Steris Pharmaceutical chose Ideal Shield handrail because it’s sturdy, and the mounting brackets worked really well. Very happy with the product.”

Kevin Korb - Rite Hite

“When compared to other railing systems, Ideal Shield’s anchor system is cost-efficient and super strong – plus fully removable for relocation. Ideal Shield offers quality products that are very durable and never require painting.”

Donnie Frederick - Odessa College

“Ideal Shield has helped me out of many issues over the last couple of years. The restaurant business is always under a sense of urgency. It’s refreshing when someone drops everything & goes the extra mile to help. That is VERY rare this day & age.” 

Kari Carper - BDH Contracting

“I am speechless, I have never had a company go above and beyond what Y’all are doing for Us.  There are only two words to describe Ideal Shield Character and Integrity.  I will be sure to tell everyone I do business with about your company. ” 

Joe W. - AT&T

“Amazing customer service! I had many questions and multiple emails back and forth with them to match the correct product to my needs. They responded very quickly and precisely. Sales associate was exceptional to deal with! Amazing customer service! I had many questions and multiple emails back and forth with them to match the correct product to my needs. They responded very quickly and precisely. Sales associate was exceptional to deal with!”

Dave Albright

Other
products
you may be
interested in

10″
Skyline
Decorative
Bollard
10″
Ribbed
Decorative
Bollard
10″
Cinco
Decorative
Bollard