Quote
Page Links

Reflective Bollard Covers

Get a quote
Introduction Gallery Product Details Ideal Advantage Color Chart What Size Do I Need? Specs & Drawings Resources Download Installation Download FAQs Testimonials

Reflective Bollard Covers

Get into the Groove

Improve Visibility & Protection

Ideal Shield’s new and improved Reflective Bollard Cover is a dome top bollard cover with two grooves toward the top of the sleeve to allow the reflective tape to lay flush against the plastic, improving the look of the bollard while reducing the chances of the tape peeling.

Our Reflective Bollard Covers reduce the need for paint and future maintenance costs.

Easily installed with our patented tape, Ideal Shield’s Reflective Bumper Post Sleeves slide over steel pipe bollards for quick and permanent installation.

Reflective Bollard Covers can fit either 4” or 6” pipe and are available in both dome top and flat top options, as well as 1/4″ or 1/8″ wall thickness. 

Cover colors include Yellow, Black and Red for 1/8″ covers and only Yellow for the 1/4″ covers. 

Yellow, red, or silver reflective tape is available at no additional cost (for groove topped covers only). 

Request a Quote

Product
Details Product Details

Design: Dome Top with Tape Grooves
Material: 1/8" or 1/4" thick Thermoplastic Polyethylene with Ultra-Violet and Anti-Static Additives
Height: Standard fits 65" pipe
*Installation Tape Included

Part Number Example:

part number guide

TAPE:

reflective tape available at no additional cost

Yellow, Red or Silver

American Made

Made and Fabricated in the USA

DECALS:

Add Custom Logos, Slogans or Messages

The Ideal

Advantage

  • Fits 4″ and 6″ pipes
  • Available in yellow, black, onyx gray, 285 blue or red (depending on thickness and dome vs flat top)
  • Available in 1/8″ or 1/4″ wall thickness
  • Standard height is 65″-69″ to the top of the dome
  • Yellow, red, or silver (appears white) reflective tape options included
  • 2 pieces of installation tape included for fast installation – no messy adhesive or screws required

Color
Chart


Ideal Shield offers three standard Reflective Bollard colors and three standard reflective tape colors.

Custom colors are available for larger quantities upon request for an up-charge. To discuss a custom color option, please contact our customer service at (866) 825-8659

Don’t see the color you’d like? Check out our 1/4″ Bollard Covers, which are available any color imaginable. 

Yellow (Pantone 012C)
Yellow (Pantone 012C)
Yellow (Pantone 012C)
Red (Pantone 187C)
Red (Pantone 187C)
Red (Pantone 187C)
Black (Pantone 6C)
Black (Pantone 6C)
Black (Pantone 6C)

[ CLICK THE COLORS BELOW TO SEE THEM APPLIED ]

*Reproduction of web colors are not always “what you see is what you get” because colors on your monitor and the color produced physically can, and most likely will, vary. 

Yellow

(Pantone 012C)
Silver

Yellow

(Pantone 012C)
Yellow

Yellow

(Pantone 012C)
Red

Red

(Pantone 187C)
Silver

Red

(Pantone 187C)
Yellow

Red

(Pantone 187C)
Red

Black

(Pantone 6C)
Silver

Black

(Pantone 6C)
Yellow

Black

(Pantone 6C)
Red
Click on the color swatches for samples

What Size Do I Need?

Reference Chart

  • OD=Outside Diameter
  • ID=Inside Diameter

Most Common Pipe & Sleeve Sizes

Pipe OD Ideal Sleeve Size Sleeve ID Pipe Circumference Pipe Size Image Reference
4 1/2″ 4" 5" 14" - 15" 4" Example Image
6 5/8" 6" 7" 20 1/2" - 21 1/2" 6" Example Image

Downloads

Specs and drawings

(1/8″) 4″ Reflective Bollard Cover

Order Form

(1/8″) 6″ Reflective Bollard Cover

Order Form

(1/4″) 4″ Reflective Bollard Cover

Order Form

(1/4″) 6″ Reflective Bollard Cover

Order Form

Resources

Steel Pipe

Sizing Chart

Bollard Cover Measuring Tool

(PRINT: ACTUAL SIZE, NOT FIT TO PAGE)

Installation

Bollard Cover Install

Instructions

Bollard Cover Install

Video

Brand Your Bollards & Bases

Interested in branding your Bollard Covers and Sign Bases with custom colors and/or decals? Click here to learn more

Frequently Asked
Questions

The reflective bollard cover is available to fit 4’’ and 6’’ steel pipe diameters. If you have a larger or smaller pipe size diameter, our smooth bollard cover fits all pipe sizes 3’’- 10’’.
Measure the circumference (distance around the post) Take that dimension and divide it by pi (3.14) Example: Circumference is 21″ Divide by 3.14 Pipe size in 6.625″ The bollard cover size you need is 6″
Pipe is measured by inside diameter. For example, 6" pipe has an outside diameter of 6 5/8". Our bollard sizes coincide with the pipe’s outside diameter, ex. our 6" cover has an inside diameter of about 6 7/8" to fit over the 6 5/8" outside diameter of a 6” pipe.
Each bollard cover is delivered with two pieces of our patented foam neoprene tape. Apply the neoprene tape around the circumference of the steel bollard 3" down from the top of the post and 3" up from the bottom of the post. Once the tape is applied, slide the bollard cover over, eliciting the sound of air squeezing out between the post and sleeve as it creates a vacuum seal. If the above directions are followed correctly, the Ideal Shield Bollard Cover should fit tight with no gaps.
The Reflective Bollard Cover is available in Yellow, Black and Red for 1/8" covers and only Yellow for the 1/4" covers. For more color options, please see the 1/8″ bollard cover or the 1/4″ bollard cover.
Yes, reflective stripes are available for Ideal Shield’s Reflective Bollard Cover at no additional charge but only for the Groove Topped Covers, not the Standard Dome Top Covers. Reflective stripes are available in silver, red, or yellow.
Yes, our reflective tape can be applied to any of our other bollard covers as well, not just the Reflective Bollard Cover. Ask a sales rep for more information.

Our Customers

What our customers are saying

I have been truly impressed with the covers we bought from you so many years ago. They have been exposed to direct sunlight for years and have not faded one bit after all this time! Kudos!

Mark C. - UBT

“First and foremost, we have loved the sign bases. They have gone through the various states of weather that Minnesota has to offer and they are withstanding the weather and doing a great job for us. At this time, we have all of our needs, however, after the Super Bowl and when we head into our spring events we could be looking to purchasing additional signs. ” 

Representative from US Bank Stadium, home of the Minnesota Vikings & Super Bowl 52

“This is just what we were looking for. Well made. We will be installing it next week. Everyone here is excited to have a railing to hang onto with winter coming. We at St. Cyprian thank you and your facility for help us.”

Carl Baltosiewich w/St. Cyprian

“Ideal Shield had some of the best prices on the market for bollards and covers. They were very easy to deal with and provided prompt shipment. The quality of the material was exceptional and a breeze to install.” 

James Harvill

“Steris Pharmaceutical chose Ideal Shield handrail because it’s sturdy, and the mounting brackets worked really well. Very happy with the product.”

Kevin Korb - Rite Hite

“When compared to other railing systems, Ideal Shield’s anchor system is cost-efficient and super strong – plus fully removable for relocation. Ideal Shield offers quality products that are very durable and never require painting.”

Donnie Frederick - Odessa College

“Ideal Shield has helped me out of many issues over the last couple of years. The restaurant business is always under a sense of urgency. It’s refreshing when someone drops everything & goes the extra mile to help. That is VERY rare this day & age.” 

Kari Carper - BDH Contracting

“I am speechless, I have never had a company go above and beyond what Y’all are doing for Us.  There are only two words to describe Ideal Shield Character and Integrity.  I will be sure to tell everyone I do business with about your company. ” 

Joe W. - AT&T

“Amazing customer service! I had many questions and multiple emails back and forth with them to match the correct product to my needs. They responded very quickly and precisely. Sales associate was exceptional to deal with! Amazing customer service! I had many questions and multiple emails back and forth with them to match the correct product to my needs. They responded very quickly and precisely. Sales associate was exceptional to deal with!”

Dave Albright

Other
products
you may be
interested in

1/8″
Bollard
Covers
1/4″
Bollard
Covers
Flat
Top
Bollard
Covers