Ideal Shield’s C40/S30 Traffic Impact Bollard is the industry’s most cost-effective crash bollard and are designed for storefront and property protection.
Engineered and independently tested to meet the ASTM C40 P1 Standard and F3016-F3016M S30 P1 Standard, this storefront-friendly bollard is designed to meet the ASTM F2656 storefront requirements. The 6″ security bollard barriers are designed for bi-directional stopping capability meaning they can be hit from any angle and keep its strength. One properly installed single standalone bollard is engineered and designed to stop a 5,000 lbs. vehicle at 30 mph impact with less than 12″ of vehicle penetration, which makes it greater than the S10 and S20 standards.
The Traffic Impact Bollard is available in both permanent and removable options, with both options distributing exceptional stopping power making it an ideal application for storefronts, schools, and other pedestrian-friendly areas. If you’re looking to add more protective signage to your storefront, Bollard Sign Systems are available as well.
To save time and money on the installation, the simple Set & Pour installation will also make life easier for everyone. Simply set a single prefabricated steel bollard in excavation and pour in the concrete (no rebar in the foundation). Don’t worry about tying, bolting, welding, assembly, or specialty subgrade, as it is not required. The bollards are one single unit with a lifting pin to make the installation even easier.
These TIB-67-SA Bollards are also cost-effective as the bollards have an unrestricted spacing limit and can also be field adjusted, as it is easy to properly install with turns and across grade elevation changes using a standard bollard.
Once your new Safety Bollards are in place, you’ll want to make it look good by covering it with an Ideal Shield Bollard Cover. Sleeve it with our Standard Dome-Top Bollard Covers, our stylish Decorative Bollard Covers, or any of our other Bollard Cover options to make the barrier more visually appealing. Galvanizing is also available upon request.
Looking for more heavy-duty Crash Rated Bollards? Check out the K4 Crash Rated Bollards or our K12 Crash Rated Bollards.
Materials:
Bollard: 6" Sch 40 pipe with steel gussets and 10" disk
*2 pcs of Vertical Rebar included
Finish: Red or Grey primer
Bollard Cover: 1/4" Bollard Cover
Styles: Standard, Removable, Sign System
*ground cap sold separately
Properly Installed Bollard Stopped 2,430 lbs. vehicle at 40 mph
Engineered and Designed to Stop 5,000 vehicle at 30 mph
Made and Fabricated in the USA
Set bollard in excavation and pour concrete
No tying, bolting, welding, assembly, or specialty subgrade required.
The traditional high-impact ratings as described by ASTM are as follows:
| Vehicle | Speed Rating | Penetration Rating |
|---|---|---|
|
Medium Duty Truck
15,000 lbs
|
|
|
|
Small Passenger Cart
2,430 lbs
|
|
|
|
Pickup Truck
5,070 lbs
|
|
|
|
Heavy Goods Vehicle
65,000 lbs
|
|
|
The crash ratings for this standard are as follows:
| Vehicle | Speed Rating | Penetration Rating |
|---|---|---|
|
Surrogate Vehicle
(with specified crumple zone)
5,000 lbs
|
|
|
Interested in branding your Bollard Covers and Sign Bases with custom colors and/or decals? Click here to learn more
